Hanging Header Style

Soft top

4-IN-1
  • Versatile 4-in-1 construction: Hook Belt, Rod Pocket, Back Tab and Clip Ring.
  • 3 inches rod pocket size.
  • Hook belt metal pin hook in 3 inches. 6 pin hooks per 40 inches width. Hooks included.
  • Side hem 1 inch, bottom hem 3 1/8 inches.
  • Measure length from the ring eyelet or top of the pole to bottom. Rod clip rings are not included.
  • If rod length is 100 inches, multiply by 150-200% width for folds, then order 2 panels each 75-100 inches wide.
  • It works for rods with rings, rod with clip rings and pole.
4-IN-1 Back Construction
  • Hook Belt: hang with metal pin hooks. (included)
  • Clip ring: hang with clip rings (not included)
  • Rod Pocket: hang with rod pocket for bunched-like look.
  • Back Tab: hang with back tab for pleated-like look.
FLAT HOOKS
  • Adjustable plastic hooks 3 inches. 6 pin hooks per 40 inches width.
  • Side hem 1 inch, bottom hem 4 inches.
  • Measure length from the eye ring to floor.
  • If rod length is 100 inches, consider 150-200% fullness to order more width for folds, order 2 panels each 75-100 inches wide.
  • It works for rod with rings.
TAB TOP
  • Tab height 4 inches, 6 tabs per 40 inches.
  • Side hem 1 inch, bottom hem 3-1/8 inches.
  • Curtain length is measured from the top of the pole to floor.
  • If rod length is 100 inches, consider fullness 120-200% width for folds, order 2 panels each 60-100 inches wide.
  • Velcro tab top allow to remove and install easily, and it is optional for outdoor curtains or room divider.
  • It works for rod.
ROD POCKET
  • Pocket 3 inches. Top flange is optional.
  • Side hem 1 inch, bottom hem 3-1/8 inches.
  • If rod length is 100 inches, consider 150% width for fullness, folds, order 2 panels each 75 inches wide.
  • It works for rod or rod with clip rings.
BACK TAB
  • Tab height 4 inches. Pocket size 3 inches.
  • 6 tabs per 40 in width, 8 tabs for 50 in width, 10 tabs for 72 in width, 12 tab for 84 in width, 15 tabs for 100 in width.
  • Side hem 1 inch, bottom hem 3-1/8 inches.
  • If rod length is 100 inches, order 200% fullness width for folds, then order 2 panels each 100 inches wide.
  • It works for rod or rod with clip rings.

Hanging Header Style

Pleated style

Pleats Space & Numbers for Various Width
  • The width and space of pleats may vary slightly depending on your track or pole length. Normally pleats space apart 5.5 inches. Provided you have special certain pleats spacing requirement, please let us know for custom made specially, you need pay extra charge fee.
  • Pleats pin hooks: 10 pleats for 50 in width, 13 pleats for 72 in width, 15 pleats for 84 in width, 19 pleats for 100 in width, 21 pleats for 110 in width, 23 pleats for 120 in width, 27 for 150 in width.
For pinch pleat, tailor pleat, inverted pleat, and goblet style (Dimension in inches)
  • Finish Width
  • Fullness
  • Side Hem
  • Pleats Numbers
  • Pleat Depth
  • Return
  • Pleats Space
  • 25
  • 2
  • 1
  • 6
  • 1.2
  • 2
  • 5.00
  • 30
  • 2
  • 1
  • 7
  • 1.2
  • 2
  • 5.00
  • 40
  • 2
  • 1
  • 8
  • 1.2
  • 2
  • 5.71
  • 50
  • 2
  • 1
  • 10
  • 1.2
  • 2
  • 5.56
  • 60
  • 2
  • 1
  • 12
  • 1.2
  • 2
  • 5.45
  • 70
  • 2
  • 1
  • 14
  • 1.2
  • 2
  • 5.38
  • 80
  • 2
  • 1
  • 16
  • 1.2
  • 2
  • 5.33
  • 90
  • 2
  • 1
  • 17
  • 1.2
  • 2
  • 5.63
  • 100
  • 2
  • 1
  • 19
  • 1.2
  • 2
  • 5.56
  • 110
  • 2
  • 1
  • 21
  • 1.2
  • 2
  • 5.50
  • 120
  • 2
  • 1
  • 23
  • 1.2
  • 2
  • 5.45
For triple pleat and triple tailor pleat style (Dimension in inches)
  • Finish Width
  • Fullness
  • Side Hem
  • Pleats Numbers
  • Pleat Depth
  • Return
  • Pleats Space
  • 25
  • 2.3
  • 1
  • 6
  • 1.2
  • 2
  • 5.00
  • 30
  • 2.3
  • 1
  • 7
  • 1.2
  • 2
  • 5.00
  • 40
  • 2.3
  • 1
  • 8
  • 1.2
  • 2
  • 5.71
  • 50
  • 2.3
  • 1
  • 10
  • 1.2
  • 2
  • 5.56
  • 60
  • 2.3
  • 1
  • 12
  • 1.2
  • 2
  • 5.45
  • 70
  • 2.3
  • 1
  • 14
  • 1.2
  • 2
  • 5.38
  • 80
  • 2.3
  • 1
  • 15
  • 1.2
  • 2
  • 5.71
  • 90
  • 2.3
  • 1
  • 17
  • 1.2
  • 2
  • 5.63
  • 100
  • 2.3
  • 1
  • 19
  • 1.2
  • 2
  • 5.56
  • 110
  • 2.3
  • 1
  • 20
  • 1.2
  • 2
  • 5.79
  • 120
  • 2.3
  • 1
  • 22
  • 1.2
  • 2
  • 5.71
PINCH PLEAT
  • Pinch pleats are more gathered than other headings and have permanent sewn-in pleats for a more luxurious look. It is also called Double Pleated.
  • It works for the track, traverse rod, channel rod, and pole with rings.
  • Comes with adjustable plastic pin hooks.
Pinch Pleat with Back Tab
  • A classic pleat pleat style with back tab.
  • Normally, the tab height is 8cm, fitting for rods with a diameter of 1.5 inches and below.
  • Comes with adjustable plastic pin hooks.
  • Can be hung on rings or rod directly. Pay attention to height measurement due to 2 different ways of hanging.
TRIPLE PLEAT
  • Triple pleats are more gathered than pinch pleats and have permanent sewn-in pleats for a more luxurious look.
  • It works for the track, traverse rod, channel rod, and pole with rings.
  • Comes with adjustable plastic pin hooks.
TAILOR PLEAT
  • Tailor pleats are more gathered than other headings and have permanent sewn-in pleats.
  • Pleats space apart 5.5-6.5 inches.
  • Pleats metal pin hooks quantity: 10 pleats for 50 in width, 13 pleats for 72 in width, 15 pleats for 84 in width, 19 pleats for 100 in width, 21 pleats for 110 in width, 23 pleats for 120 in width, 27 for 150 in width.
  • Panel width is the width that pleats already set. 180% fabric width is used for pleats.
  • Metal pin hooks are not included. Only adjustable pin hooks are included.
  • Length is measured from the eyelet ring where the curtain hooks are attached to floor.
  • If rod or track length is 100 inches, then order 1 panel 100 inches width or 2 panels each 50 inches width.
  • It works for the track, traverse rod, channel rod, and pole with rings.
TRIPLE TAILOR PLEAT
  • Triple tailor pleats are more gathered than other headings and have permanent sewn-in pleats.
  • Pleats space apart 5.5 inches.
  • Pleats metal pin hooks quantity: 10 pleats for 50 in width, 13 pleats for 72 in width, 15 pleats for 84 in width, 19 pleats for 100 in width, 21 pleats for 110 in width, 23 pleats for 120 in width, 27 for 150 in width.
  • Panel width is the width that pleats already set. 220% fabric width is used for pleats.
  • Metal pin hooks are not included. Only adjustable pin hooks are included.
  • Length is measured from the eyelet ring where the curtain hooks are attached to floor.
  • If rod or track length is 100 inches, then order 1 panel 100 inches width or 2 panels each 50 inches width.
  • It works for the track, traverse rod, channel rod, and pole with rings.
GOBLET
  • Goblet pleats are more gathered than other headings and have permanent sewn-in pleats.
  • Pleats space apart 5.5 inches.
  • Pleats metal pin hooks quantity: 10 pleats for 50 in width, 13 pleats for 72 in width, 15 pleats for 84 in width, 19 pleats for 100 in width, 21 pleats for 110 in width, 23 pleats for 120 in width, 27 for 150 in width.
  • Panel width is the width that goblet pleats already are made. 180% fabric width is used for pleats.
  • Metal pin hooks are included.
  • Length is measured from the eyelet ring where the curtain hooks are attached to floor.
  • If rod or track length is 100 inches, then order 1 panel 100 inches width or 2 panels each 50 inches width.
  • It works for the track, traverse rod, channel rod, and pole with rings.
INVERTED BOX PLEAT
  • It is formed by two equal folds of fabric folded toward one another so they meet at the center of the pleat on the front of the fabric. It is what a box pleat looks like from behind.
  • Pleats space distance 5 inches.
  • Side hem 1 inch, bottom hem 3 1/8 inches.
  • S-shaped metal pin hook included.
  • Panel width is the width that pleats already set. 180% fabric width is used for pleats and folds to create 100% finished width you order.
  • Measure length from the eye ring to the bottom. Rod rings are not included, which are purchased separately.
  • 9 pleats for 50 in width, 13 pleats for 72 in width, 15 pleats for 84 in width, 19 pleats for 100 in width, 21 pleats for 110 in width, 23 pleats for 120 in width, 29 for 150 inwidth.
  • If rod length is 100 inches, order 2 panels each 50 inches width.
  • It works for rods with rings and track.
GROMMET
  • Inside diameter 1.6 inches, outside diameter 2.25 inches.
  • 6 grommets for 42 in wide, 8 for 50 in, 10 for 72 in, 12 for 84 in, 14 for 100 in, 16 for 120 in, 22 for 150 in, 26 for 180 in.
  • Side hem 1 inch, bottom hem 3-1/4 inches.